# HACCP Sanitary Entry Sluice, Walk-Through Boot Washer Turnstile & Boot Drying Guide

Canonical URL: https://www.hepakit.com/haccp-boot-washer-turnstile-sluice-guide

> Engineering Sizing Rule: One single-lane `HK-HYG-GT24` walk-through boot washer + sensor hand wash/dryer + two-hand sanitizer interlocked tripod turnstile processes 4–5 workers per minute (40–50 workers per 10-minute shift change). Priced at $2,890–$3,850 FOB (1.5mm AISI 304) vs $12,000–$28,000+ Western distributor quotes.

## Core Sanitary Changing-Room BOM
- `HK-HYG-GT24`: All-in-One 5-Brush Boot Sole+Shaft Washer, IR Hand Wash/Dry & Interlocked Turnstile (`2430×1280×1470mm`, `4.95 CBM`, **$2,890** Tier-3)
- `HK-SHOE-20C`: 20-Pair SUS304 Internal Nozzle Warm-Air & Ozone Boot Drying Cabinet (`1500×510×1980mm`, English controller, **$960** Tier-3)
- `HK-LCK-UV4`: Sloped-Top SUS304 UV-C & Ozone Cleanroom Garment Sterilizing Locker (`1200×500×1950mm`, **$695** Tier-3)
- `HK-DRN-TP15`: 2.0mm SUS304 Double Water-Seal Anti-Odor Floor Drain (`150×150mm`, **$56** Tier-3)

## Frequently Asked Questions
- **How many workers per minute can pass through one HK-HYG-GT24 sanitary entry turnstile?** — Because the tripod turnstile remains mechanically locked until the optical sensor verifies both hands have entered the sanitizer chamber (typically a 10–15 second wash + dry + sanitize + walk-through boot brush sequence), one single-lane HK-HYG-GT24 processes 4 to 5 operators per minute (40–50 workers in a 10-minute shift change). Facilities with 60–100+ operators per shift install 2 parallel lanes to eliminate shift-change bottlenecks.
- **Why do BRCGS Issue 9 and SQF High-Risk zones require vertical boot-shaft brushes instead of sole-only mats?** — In wet meat, poultry, seafood, dairy, and ready-to-eat (RTE) plants, Listeria monocytogenes frequently harbors on the ankle crease and upper rubber boot shaft—not just the sole tread. HK-HYG-GT24 and HK-HYG-BT2 combine 2 horizontal sole brushes with 3 vertical Ø200×300mm shaft brushes plus automatic chemical venturi dosing.
- **Does the HK-SHOE-20C boot drying cabinet vent ozone into the locker room?** — No. HK-SHOE-20C uses a low-concentration closed-cabinet deodorizing cycle paired with 40 internal warm-air boot-tree nozzles (48°C–55°C PTC heating) and a top Ø100mm exhaust duct collar so humid air and residual odor vent directly outdoors, keeping Wellington boots bone-dry between shifts.
- **Can the turnstile unlock in reverse for emergency fire egress or shift exit?** — Yes. Standard configuration includes fail-safe power-loss free-wheeling drop-arm/release for fire egress and configurable bi-directional exit brush wash so workers wash blood/dough off boots before re-entering the welfare locker room.
