 | HK-FLT-01 | H13 Mini-Pleat HEPA Filter Element (610×610×69mm) EN 1822 H13 (≥99.99% @ 0.3μm), ultra-fine HV fiberglass media, anodized aluminum frame, dual-side protective mesh, seamless PU foam gasket, MPPS scan report. | Nominal Frame: 610 × 610 × 69 mm (24×24×2.7 in) | 0.04 CBM / 6.5 kg | $139 | $119 | $99 / pc |
 | HK-FLT-02 | H14 Pharmaceutical Blue Gel-Seal HEPA Filter (610×610×80mm) EN 1822 H14 (≥99.995% @ 0.3μm), self-healing urethane blue gel channel in top perimeter trough for knife-edge ceiling housings & weighing booths. | Knife-Edge Channel Skirt: 610 × 610 × 80 mm | 0.05 CBM / 8.2 kg | $219 | $189 | $162 / pc |
 | HK-LVR-G4 | Cleanroom Filtered Return Air Grille with Removable G4 Mesh (500×300mm) Anodized/powder-coated extruded aluminum low-wall return air louver with tool-free hinged/clip face and washable G4 pleated pre-filter cartridge for cleanroom return chases. | Wall Panel Cutout: 505 (W) × 305 (H) mm | 0.02 CBM / 2.6 kg | $58 | $49 | $42 / pc |
 | HK-DMP-PR | Cleanroom Counterweight Overpressure Relief Damper (Room Pressure Valve) Anodized aluminum frame with precision counter-balanced aerodynamic blades; automatically relieves excess air when room differential pressure exceeds set 10–50 Pa without power. | Wall Panel Cutout: 430 (W) × 330 (H) mm | 0.03 CBM / 3.5 kg | $76 | $65 | $55 / pc |
 | HK-DIF-SW | Multi-Cone Cleanroom Anodized Ceiling Jet / Swirl Diffuser (Ø300mm) Spun aluminum multi-cone concentric ceiling air supply diffuser with rear opposed-blade volume damper; uniform draft-free air distribution for ISO 7–8 corridors and labs. | Ceiling Neck Opening: Ø305 mm (Face OD Ø420 mm) | 0.03 CBM / 2.4 kg | $54 | $46 | $38 / pc |
 | HK-FFU-AC | 1175×575mm Alu-Zinc AC 3-Speed Fan Filter Unit (with H13 HEPA) Low-noise backward-curved AC external-rotor motor (0.35–0.50 m/s, 52 dB(A)), 1.0mm galvalume walk-resistant casing + 69mm H13 mini-pleat HEPA included. | T-Bar Ceiling Grid: 1200 × 600 mm Centerline | 0.26 CBM / 26 kg | $195 | $169 | $142 / unit |
 | HK-FFU-EC | 1175×575mm Smart EC Brushless RS485 Modbus FFU (with H14 HEPA) High-efficiency EC motor (only 105W @ 0.45 m/s), built-in RS485 Modbus RTU group speed/fault control + EN 1822 H14 HEPA filter included. | T-Bar Ceiling Grid: 1200 × 600 mm Centerline | 0.26 CBM / 27 kg | $295 | $258 | $218 / unit |
 | HK-HEP-DOP | 1000 m³/h Gel-Seal DOP/PAO Terminal HEPA Diffuser Box PE-insulated cold-rolled plenum box (top or side Ø250/300mm collar), room-side PAO aerosol injection & upstream pressure port, blue gel-seal H14 filter & swirl faceplate. | Ceiling Panel Cutout: 645 × 645 mm | 0.22 CBM / 21 kg | $155 | $135 | $112 / set |
 | HK-CB-V01 | Single-Operator ISO 5 Vertical Laminar Flow Clean Bench ISO Class 5 (≤100 particles ≥0.5μm/ft³), counter-balanced sash door, perforated SUS304 workzone (960×620×650mm), LED + UV interlock & digital velocity meter. | External Dimensions: 1080 × 750 × 1680 mm | 1.65 CBM / 145 kg | $980 | $860 | $730 / unit |
 | HK-DB-1500 | cGMP Walk-In Downflow Booth / Weighing, Sampling & Dispensing Booth (1500×1200) SUS304 modular powder-containment downflow booth (1500×1200×2200mm), G4 + F8 + Gel-Seal H14 3-stage filtration, PLF polymer airflow damping membrane, VFD auto velocity. | Clear Room Height Required: ≥ 2450 mm | 3.2 CBM / 420 kg | $4200 | $3680 | $3150 / unit |
 | HK-AHU-10K | 10,000 m³/h Thermal-Break Hygienic Cleanroom AHU (Modular) 50mm PU thermal-break casing (EN 1886 L1/TB2), G4 + F8 bag filters, copper-fin chilled/DX coil + electric reheat + electrode humidifier, SUS304 drain pan. | Split Shipping Sections: ≤ 1150 mm Width | 8.5 CBM / 920 kg | $6800 | $6100 | $5450 / unit |